In order to properly slice for the new 5 tool Prusa XL printers, you will need to add the printer as a preset to your Prusa Slicer software. To do this:
- Open Prusa Slicer
- Locate the Printer pull down on the right.

- Click the Gear Icon on the right and choose Add/Remove Presets

- The Configuration Wizard will load. Click the Prusa Research section.

- Scroll down until you find the XL Multitool Family section. Select the 0.4mm Nozzle option on both the 2T and 5T models.

- Click Finish at the bottom right. The presets will be added.
- To print to the new printer, choose the Original Prusa XL - 5T Input Shaper 0.4 nozzle option in the printer.

You are now ready to slice and print in the new XL printer
For information related to Maker Space equipment such as 3d printers, embroidery, heat press, etc...